Schedule 3 (Annex II to the Pressure Equipment Directive)F1

Table 1

Vessels referred to in Article 3, Section 1.1(a), first indent

Exceptionally, vessels intended to contain an unstable gas and falling within categories I or II on the basis of Table 1 must be classified in category III.

Table 2

Vessels referred to in Article 3, Section 1.1(a), second indent

Exceptionally, portable extinguishers and bottles for breathing equipment must be classified at least in category III

Table 3

Vessels referred to in Article 3, Section 1.1(b), first indent

Table 4

Vessels referred to in Article 3, Section 1.1(b), second indent

Exceptionally, assemblies intended for generating warm water as referred to in Article 3, Section 2.3, must be subject either to an EC design examination (Module B1) with respect to their conformity with the essential requirements referred to in Sections 2.10, 2.11, 3.4, 5(a) and 5(d) of Annex I, or to full quality assurance (Module H).

Table 5

Pressure equipment referred to in Article 3, Section 1.2

Exceptionally, the design of pressure-cookers must be subject to a conformity assessment procedure equivalent to at least one of the category III modules.

Table 6

Piping referred to in Article 3, Section 1.3(a), first indent

Exceptionally, piping intended for unstable gases and falling within categories I or II on the basis of Table 6 must be classified in category III.

Table 7

Piping referred to in Article 3, Section 1.3(a), second indent

Exceptionally, all piping containing fluids at a temperature greater than 350°C and falling within category II on the basis of Table 7 must be classified in category III.

Table 8

Piping referred to in Article 3, Section 1.3(b), first indent

Table 9

Piping referred to in Article 3, Section 1.3(b), second indent