Regulation 49 UK markingF8E1

Before placing on the market, the F1UK marking must be affixed visibly, legibly and indelibly to the following:

For a period of F5seven years beginning with IP completion day, the UK marking may be affixed to—

The requirement in paragraph (1) does not apply in cases where—

Where F6paragraph (1A) does not apply and it is not possible or warranted, on account of the nature of the equipment or assembly, to affix the UK marking in accordance with paragraph (1), the UK marking must be affixed to—

At the time the UK marking is affixed, the item or assembly referred to in subparagraph (1)(a) or (b) must be—

Individual items of pressure equipment already bearing the UK marking when incorporated into an assembly must continue to bear that marking, but the UK marking need not be affixed to each additional item of pressure equipment making up an assembly.

The UK marking must be followed by the identification number of the F7approved body which carried out the relevant conformity assessment procedure for the pressure equipment or assembly, where that body is involved in the production control phase.

The identification number of the approved body must be affixed—

The UK marking and, where applicable, the identification number of the approved body may be followed by any other mark indicating a special risk or use.