OpenLegislation

Regulation 6 Amendment of Regulation (EU) 2015/758

Original text. Later amendments are not shown.

(1)

Regulation (EU) 2015/758 is amended as follows.

(2)

In Article 5 (specific obligations of manufacturers)—

(a)

in paragraph 8, in the second sub-paragraph—

(i)

for items (a) to (d), substitute—

“(a)

EN 16072:2025 ‘Intelligent transport systems — eSafety — Pan-European eCall operating requirements’f1;

(b)

CEN/TS 17184:2022 or EN 17184:2024 ‘Intelligent transport systems — eSafety — eCall high level application protocols (HLAP) using IP multimedia sub-system (IMS) over packet-switched networks’f2;

(c)

CEN/TS 17240:2018 or EN 17240:2024 ‘Intelligent transport systems — eSafety — eCall end to end conformance testing for IMS packet-switched based systems’f3;

(d)

EN 15722:2020 ‘Intelligent transport systems — eSafety — eCall minimum set of data (MSD)’f4;”;

(ii)

after item (f), insert—

“Notwithstanding the standards specified in items (a) to (d) above, the manufacturer is permitted to conduct testing in accordance with the standards specified in the second column of the Table until the date specified in the third column, and to register those standards until the date specified in the fourth column.

Table

Standard referenced in paragraph 8Alternative standardNew types may be approved in accordance with the standard specified in column two until the date specified belowFor new vehicles approved in accordance with Regulation (EU) 2015/758 and the standards specified in this table, the Secretary of State shall deem the certificates of conformity to be no longer valid for the purposes of Article 48(1) of Regulation (EU) 2018/858 from the date specified below
(a)EN 16072:2015 ‘Intelligent transport systems — eSafety — Pan-European eCall operating requirements’f531 December 2025N/A
(b)EN 16062:2015 ‘Intelligent transport systems — eSafety — eCall high level application requirements (HLAR)f6or EN 16062:2023 ‘Intelligent transport systems — eSafety — eCall end to end conformance testingf731 December 20251 January 2027
(c)EN 16454:2015 ‘Intelligent transport systems — eSafety — eCall end to end conformance testing’f8 or EN 16454:2023 ‘Intelligent transport systems — eSafety — eCall end to end conformance testing’f931 December 20251 January 2027
(d)EN 15722:2015 ‘Intelligent transport systems — eSafety — eCall minimum set of data (MSD)’f1031 December 2025N/A

”.

Annotations

Footnotes

f1

A copy of EN 16072:2025 can be obtained from the British Standards Institution or accessed online at www.bsigroup.com.

f2

A copy of CEN/TS 17184:2022 and EN 17184:2024 can be obtained from the British Standards Institution or accessed online at www.bsigroup.com.

f3

A copy of CEN/TS 17240:2018 and EN 17240:2024 can be obtained from the British Standards Institution or accessed online at www.bsigroup.com.

f4

A copy of EN 15722:2020 can be obtained from the British Standards Institution or accessed online at www.bsigroup.com.

f5

A copy of EN 16072:2015 can be obtained from the British Standards Institution or accessed online at www.bsigroup.com.

f6

A copy of EN 16062:2015 can be obtained from the British Standards Institution or accessed online at www.bsigroup.com.

f7

A copy of EN 16062:2023 can be obtained from the British Standards Institution or accessed online at www.bsigroup.com.

f8

A copy of EN 16454:2015 can be obtained from the British Standards Institution or accessed online at www.bsigroup.com.

f9

A copy of EN 16454:2023 can be obtained from the British Standards Institution or accessed online at www.bsigroup.com.

f10

A copy of EN 15722:2015 can be obtained from the British Standards Institution or accessed online at www.bsigroup.com.