Part 1A Special materials and related equipmentF1F2

These items are as follows:

a. Shaped charges specially designed for oil well operations, utilising one charge functioning along a single axis, that upon detonation produce a hole, and

a.1. Contain any formulation of controlled materials;

a.2. Have only a uniform shaped conical liner with an included angle of 90 degrees or less;

a.3. Contain more than 0.010 kg but less than or equal to 0.090 kg of “controlled materials”; and

a.4. Have a diameter not exceeding F311.43 cm/ 4.5 inches;

i. Other commercial explosive devices and charges not controlled by 1C992.a to.h. containing less than or equal to 1.0 kg of controlled materials.

Note: 1C992.i includes automotive safety devices; extinguishing systems; cartridges for riveting guns; explosive charges for agricultural, oil and gas operations, sporting goods, commercial mining, or public works purposes; and delay tubes used in the assembly of commercial explosive devices.

a. A flash point exceeding 477 K (204 degrees C);

b. A pour point at 239 K ( -34 degrees C) or less;

c. A viscosity index of 75 or more; and

d. A thermal stability at 616 K (343 degrees C).

1C998 Non fluorinated polymeric substances as follows:

a. Polyarylene ether ketones, as follows:

a.1 Polyether ether ketone (PEEK);

a.2. Polyether ketone ketone (PEKK);

a.3. Polyether ketone (PEK);

a.4. Polyether ketone ether ketone ketone (PEKEKK);

(a) primary forms;

(b) filament yarn or monofilaments;

(c) filament tows;

(d) rovings;

(e) staple or chopped fibres;

(f) fabrics;

(g) pulp or flocks.

(a) semiconductor nanomaterials;

(b) composite-based nanomaterials;

(c) any of the following carbon-based nanomaterials—

(i) carbon nanotubes;

(ii) carbon nanofibres;

(iii) fullerenes;

(iv) graphenes;

(v) carbon onions.

a. “Software” specially designed for industrial process control hardware/systems controlled by 1B999;

b. “Software” specially designed for equipment for the “production” of structural composites, fibres, prepregs and preforms controlled by 1B999.

F5“Technology” “required” for the “development”, “production” or “use” of the systems, equipment, components and software specified in the entries above relating to aromatic polyamides and nanomaterials.

F6Rare-earth metals and compounds, either in organic or inorganic form, including mixtures whether or not intermixed or interalloyed.

Note 1: Rare-earth metals and compounds include Scandium, Yttrium, Lanthanum, Cerium, Praseodymium, Neodymium, Promethium, Samarium, Europium, Gadolinium, Terbium, Dysprosium, Holmium, Erbium, Thulium, Ytterbium and Lutetium;

Note 2: For the purposes of the prohibition, minerals containing rare-earth metals are excluded;

Note 3: the prohibition does not prohibit mixtures in which no individual metal or compound specified in this entry constitutes more than 5% by the weight of the mixture.

F7Tungsten, tungsten carbide and alloys, not controlled by 1C117 or 1C226 of Annex 1 of the Dual-Use Regulation, containing more than 90 % tungsten by weight.

Note 1: For the purpose of this control, wire is excluded.

Note 2: For the purpose of this control, surgical or medical instruments are excluded.