The Simple Pressure Vessels (Safety) Regulations 2016 in Northern Ireland
S.I. 2016/1092 · Made 15 November 2016 · Extends to United Kingdom
Health And Safety
Consumer Protection
Made 15th November 2016
Laid before Parliament 16th November 2016
Coming into force 8th December 2016
F1F2The Secretary of State is a Minister designated for the purposes of section 2(2) of the European Communities Act 1972 in relation to measures relating to safety as regards simple pressure vessels.
These Regulations make provision for a purpose mentioned in section 2(2) of the European Communities Act 1972 and it appears to the Secretary of State that it is expedient for certain references to provisions of EU instruments to be construed as references to those provisions as amended from time to time.
The Secretary of State makes these Regulations in exercise of the powers conferred by section 2(2) of, and paragraph 1A F3 of Schedule 2 to, that Act.C1
Annotations to the whole text
Textual amendments
- F1
- F2
1972 c.68. Section 2(2) was amended by section 27(1)(a) of the Legislative and Regulatory Reform Act 2006 (c.51) and by Part 1 of the Schedule to the European Union (Amendment) Act 2008 (c.7). The enabling powers of section 2(2) were extended by virtue of the amendment of section 1(2) by section 1 of the European Economic Area Act 1993 (c.51).
- F3
Paragraph 1A of Schedule 2 was inserted by section 28 of the Legislative and Regulatory Reform Act 2006 and amended by Part 1 of the Schedule to the European Union (Amendment) Act 2008.
Modifications
Contents
- Part 1
- 1Citation and commencement
- 3Application
- Part 2: Obligations of economic operators
- Chapter: Manufacturers
- 5Technical documentation and conformity assessment for category A vessels
- 7Inscriptions for category B vessels
- 10Monitoring of vessels made available on the market
- 14Provision of information and cooperation
- Chapter: Importers
- 17Prohibition on placing on the market vessels which are not in conformity
- 19Prohibition on an importer placing on the market a category A vessel considered not to be in conformity with the essential safety requirements
- 23Transport and storage conditions
- 24Monitoring by importer of vessels made available on the market
- 27Provision of information and cooperation
- Chapter: Distributors
- 28Duty to act with due care
- 30Prohibition on a distributor making available on the market a category A vessel not considered to be in conformity with essential safety requirements
- 32Storage and transport conditions
- 34Provision of information and cooperation
- Chapter: All economic operators
- 35Cases in which obligations of manufacturers apply to importers and distributors
- 37Identification of economic operators
- Part 3: Conformity of Category A Vessels
- 41Conformity assessment procedures prior to placing a vessel on the market
- 44AUK(NI) indication
- 44BRegister of notified bodies established in the United Kingdom
- Part 4: Approval of Conformity Assessment Bodies
- Part 5: Market surveillance and enforcement
- 54Designation of market surveillance authority
- 55Enforcement
- 56Enforcement Powers
- 58Evaluation of vessels presenting a risk
- 63Restrictive measures
- 64Offences
- 66Defence of due diligence
- 67Liability of persons other than principal offender
- 68Time limit for prosecution of offences
- 69Service of documents
- 70Recovery of expenses of enforcement
- 71Action by enforcing authority
- 72Appeals against notices
- 73Appropriate court for appeals against notices
- 74Compensation
- Part 6: Miscellaneous
- 78Consequential Amendments
- Signature
- Schedule 1: Essential Safety Requirements
- Part 1: Materials
- 1Paragraph 1
- 2Pressurised parts
- 3Paragraph 3
- 4Paragraph 4
- 5Steel vessels
- 6Aluminium vessels
- 7Welding materials
- 8Accessories contributing to the strength of the vessel
- 9Non-pressurised parts
- 10Symbols
- Part 2: Vessel Design
- 11Paragraph 11
- 12Paragraph 12
- 13Paragraph 13
- 14Paragraph 14
- 15Wall thickness
- 16Calculation method
- 17Experimental method
- Part 3: Manufacturing processes
- 18Paragraph 18
- 19Preparation of the component parts
- 20Welds on pressurised parts
- 22Paragraph 22
- 23Putting into service of the vessels
- Schedule 2: Conformity Assessment Procedures
- Part 1: EU-Type Examination (Module B)
- Part 2: Conformity to type based on internal production control plus supervised vessel testing (Module C1)
- Part 3: Conformity to type based on internal production control plus supervised vessel checks at random intervals (Module C2)
- Part 4: Conformity to type based on internal production control (Module C)
- Part 5: Interpretation
- 21Paragraph 21
- Schedule 3: EU Declaration of Conformity
- 1EU Declaration of conformity (No xxxx)
- 2Paragraph 2
- 3Paragraph 3
- 4Paragraph 4
- 8Paragraph 8
- Schedule 4: Notified bodies
- Part 1: Notified Body Requirements
- 1Paragraph 1
- 2Paragraph 2
- 3Paragraph 3
- 5Paragraph 5
- 6Paragraph 6
- 9Paragraph 9
- 11Paragraph 11
- 12Paragraph 12
- 13Paragraph 13
- 14Paragraph 14
- 15Paragraph 15
- Part 2: Operational obligations of notified bodies
- 22Paragraph 22
- Schedule 5: Enforcement powers of weights and measures authorities, district councils and the Secretary of State under the 1987 Act
- 1Enforcement powers under the 1987 Act
- 2Modifications to the 1987 Act
- Schedule 6: Enforcement powers of the Health and Safety Executive and the Office for Nuclear Regulation under the 1974 Act
- 1Enforcement powers under the 1974 Act
- 2Modifications to the 1974 Act
- Schedule 7: Enforcement powers of the Health and Safety Executive for Northern Ireland under the 1978 Order
- 1Enforcement powers under the 1978 Order
- 2Modifications to the 1978 Order
- Schedule 8: Compliance, withdrawal and enforcement notices
- 1Compliance notice
- 4Interpretation
- Explanatory note