OpenLegislation

Regulation 11 Annex IV machinery manufactured fully in accordance with designated standards and fully covered by such standardsF4E1

England, Wales and Scotland

(1)

This regulation applies to machinery—

(a)

which falls within a category which is referred to in Annex IV (Part 4 of Schedule 2); and

(b)

in respect of which both of the following conditions are satisfied—

(i)

that the machinery is manufactured in accordance with F1designated standards; and

(ii)

that the F2designated standards in accordance with which it is manufactured cover all the applicable essential health and safety requirements.

(2)

Where this regulation applies, the responsible person shall follow one of the following conformity assessment procedures—

(a)

the conformity assessment procedure with internal checks on the manufacture of machinery prescribed in Annex VIII (Part 8 of Schedule 2); or

(b)

the F3 Type- examination procedure prescribed in Annex IX (Part 9 of Schedule 2) and the internal checks on the manufacture of machinery prescribed in Annex VIII, point 3; or

(c)

the full quality assurance procedure prescribed in Annex X (Part 10 of Schedule 2).

Annotations

Textual amendments

F1

Word in reg. 11(1)(b)(i) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 7(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F2

Word in reg. 11(1)(b)(ii) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 7(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F3

Word in reg. 11(2)(b) substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 7(b) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

F4

Word in reg. 11 heading substituted (E.W.S.) (31.12.2020) by The Product Safety and Metrology etc. (Amendment etc.) (EU Exit) Regulations 2019 (S.I. 2019/696), reg. 1, Sch. 12 para. 7(a) (with Sch. 12 para. 22) (as amended by S.I. 2020/676, regs. 1(1), 2); 2020 c. 1, Sch. 5 para. 1(1)

Extent

E1

This version of this provision extends to England and Wales and Scotland only; a separate version has been created for Northern Ireland only