Paragraph I.1 Development not permittedF1F2

it would result in the presence of more than one anemometry mast within the curtilage of the dwellinghouse;

a stand alone wind turbine is installed within the curtilage of the dwellinghouse;

an air source heat pump is installed on the dwellinghouse or within the curtilage of the dwellinghouse;

the highest part of the anemometry mast (including apparatus fitted to the mast) would exceed 11.1 metres in height;

any part of the anemometry mast (including apparatus fitted to the mast but excluding guy lines) would be located in a position which is less than a distance equivalent to the overall height (including apparatus fitted to the mast) of the anemometry mast plus 10 % of its height when measured from any point along the boundary of the curtilage;

the anemometry mast would be installed on safeguarded land;

the anemometry mast would be installed within the curtilage of a listed building;

the anemometry mast would be installed on a site designated as a scheduled monument;

in the case of land within a conservation area, the anemometry mast would be installed so that it is visible from a highway which bounds the curtilage of the dwellinghouse;

the anemometry mast would be installed on land which is within an area of outstanding natural beauty, a World Heritage Site or a site of special scientific interest; or

an anemometry mast has been installed within the curtilage of the dwellinghouse within the preceding 5 years.