Schedule 2 VOC content limit values
United Kingdom
A. Maximum VOC content limit values for paints and varnishes
| Product Subcategory | Typef1 | VOC (g/lf2) | |
|---|---|---|---|
(1) “solvent-borne coatings (SB)” means coatings the viscosity of which is adjusted by the use of organic solvent; and | |||
| “water-borne coatings (WB)” means coatings the viscosity of which is adjusted by the use of water; | |||
(2) g/l of ready to use product. | |||
| a | Interior matt walls and ceilings (Gloss ≤25@60°) | WB | 30 |
| SB | 30 | ||
| b | Interior glossy walls and ceilings (Gloss >25@60°) | WB | 100 |
| SB | 100 | ||
| c | Exterior walls of mineral substrate | WB | 40 |
| SB | 430 | ||
| d | Interior/exterior trim and cladding paints for wood and metal | WB | 130 |
| SB | 300 | ||
| e | Interior/exterior trim varnishes and woodstains, including opaque woodstains | WB | 130 |
| SB | 400 | ||
| f | Interior and exterior minimal build woodstains | WB | 130 |
| SB | 700 | ||
| g | Primers | WB | 30 |
| SB | 350 | ||
| h | Binding primers | WB | 30 |
| SB | 750 | ||
| i | One-pack performance coatings | WB | 140 |
| SB | 500 | ||
| j | Two-pack reactive performance coatings for specific end use such as floors | WB | 140 |
| SB | 500 | ||
| k | Multi-coloured coatings | WB | 100 |
| SB | 100 | ||
| l | Decorative effect coatings | WB | 200 |
| SB | 200 | ||
B. Maximum VOC content limit values for vehicle refinishing products
| Product sub-category | Coatings | VOC g/lf3 | |
|---|---|---|---|
(1) g/l of ready to use product. Except for sub-category (a) any water content of the ready to use product should be discounted. | |||
| a | Preparatory and cleaning | Preparatory | 850 |
| Pre-cleaner | 200 | ||
| b | Bodyfiller/stopper | All types | 250 |
| c | Primer | Surface /filler and general (metal) primer | 540 |
| Wash primer | 780 | ||
| d | Topcoat | All types | 420 |
| e | Special finishes | All types | 840 |
Annotations
Footnotes
- f1
(1)
“solvent-borne coatings (SB)” means coatings the viscosity of which is adjusted by the use of organic solvent; and
- f2
(2)
g/l of ready to use product.
- f3
(1)
g/l of ready to use product. Except for sub-category (a) any water content of the ready to use product should be discounted.