OpenLegislation

Regulation 15 I1

An inspector may obliterate the stamp on any filling instrument which –

(a)

has, since it was last stamped, been the subject of any adjustment, alteration, addition, repair or replacement –

(i)

which could, in the opinion of the inspector, have affected its accuracy or function; and

(ii)

where the chief inspector has been furnished in writing with details of that adjustment, alteration, addition, repair or replacement;

(b)

is in use for trade for a particular purpose and –

(i)

which does not meet the requirements of Schedule 2 in respect of minimum or maximum capacity; or

(ii)

for which purpose, in the opinion of the inspector, it is otherwise unsuitable; or

(c)

is in use for trade in circumstances where the filling instrument is subjected to any extraordinary environmental or operating conditions which, in the opinion of the inspector, –

(i)

prevent the filling instrument operating consistently and correctly; or

(ii)

are likely prematurely to degrade the metrological characteristics of the filling instrument.

Annotations

Commencement

I1

Reg. 15 in operation at 1.3.2005, see reg. 1(1)