OpenLegislation

Regulation 31 I1

England, Wales and Scotland

Original text. Later amendments are not shown.

F1(1)

No discontinuous totaliser shall be tested, passed as fit for use for trade and stamped unless either—

(a)

it has been completely erected ready for use and installed at the place where it is to be used, or

(b)

it has been completely erected ready for use in conditions which are in all material respects the same as those at the place where it is to be used and it is not to be dismantled before it is installed at that place.

(2)

Every discontinuous totaliser submitted for testing shall be in a clean condition.

(3)

For the purposes of the performance by an inspector of his functions under the Act or these Regulations relating to inspection, testing, passing as fit for use for trade and stamping of any discontinuous totaliser, a person submitting such a machine to an inspector or who an inspector has reasonable cause to believe has control of such a machine for use for trade shall, if requested, provide for the inspector's use F2a non-automatic weighing machine which meets the requirements of F3paragraph 5 in Part I of Schedule 2 to these Regulations and such material as the inspector may reasonably require; and any such machine and material so provided shall be returned to the person in question.

Annotations

Textual amendments

F1

Reg. 31(1) substituted (29.4.1996) by The Weighing Equipment (Filling and Discontinuous Totalising Automatic Weighing Machines) (Amendment) Regulations 1996 (S.I. 1996/797), regs. 1, 7(a)

F2

Words in reg. 31(3) substituted (29.4.1996) by The Weighing Equipment (Filling and Discontinuous Totalising Automatic Weighing Machines) (Amendment) Regulations 1996 (S.I. 1996/797), regs. 1, 7(b)

F3

Words in reg. 31(3) substituted (17.3.2000) by The Weighing Equipment (Filling and Discontinuous Totalising Automatic Weighing Machines) (Amendment) Regulations 2000 (S.I. 2000/387), regs. 1, 2(4)

Commencement

I1

Reg. 31 in force at 1.9.1986, see reg. 1