Schedule 1A (Annex to the Directive)F1

England, Wales and Scotland

1. 1Paragraph 1
2. 1.0Paragraph 1.0
3. 1.1Pressures
4. 1.2Test pressure
5. 1.3Bursting pressure
6. 1.4Total capacity of the container
7. 1.5Net capacity
8. 1.6Volume of liquid phase
9. 1.7Test conditions
10. 1.7aSubstance
11. 1.7bMixture
12. 1.8Flammable contents
13. 1.9Flammable aerosols
14. 1.9.1Flammable spray aerosols
15. 1.9.2Flammable foam aerosols
16. 1.10Chemical Heat of Combustion
17. 2GENERAL PROVISIONS
18. 2.1Construction and equipment
19. 2.1.1Paragraph 2.1.1
20. 2.1.2Paragraph 2.1.2
21. 2.1.3Paragraph 2.1.3
22. 2.2Labelling
23. 2.3Volume of the liquid phase
24. 3SPECIAL PROVISIONS FOR METAL AEROSOL DISPENSERS
25. 3.1Capacity
26. 3.1.1Test pressure of the container
27. 3.1.2Paragraph 3.1.2
28. 4SPECIAL PROVISIONS FOR GLASS AEROSOL DISPENSERS
29. 4.1Plastic coated or permanently protected containers
30. 4.1.1Capacity
31. 4.1.2Coating
32. 4.1.3Test pressure of the container
33. 4.1.4Filling
34. 4.2Unprotected glass containers
35. 4.2.1Capacity
36. 4.2.2Test pressure of the container
37. 4.2.3Filling
38. 5SPECIAL PROVISIONS APPLYING TO PLASTIC AEROSOL DISPENSERS
39. 5.1Paragraph 5.1
40. 5.2Paragraph 5.2
41. 6TESTS
42. 6.1Test requirements to be guaranteed by the person responsible for marketing the aerosol dispenser
43. 6.1.1Hydraulic test on empty containers
44. 6.1.1.1Paragraph 6.1.1.1
45. 6.1.1.2Paragraph 6.1.1.2
46. 6.1.2Bursting test for empty metal containers
47. 6.1.3Dropping test for protected glass containers
48. 6.1.4Final inspection of filled aerosol dispensers
49. 6.1.4.1Paragraph 6.1.4.1
50. 6.1.4.2Paragraph 6.1.4.2
51. 6.1.4.3Paragraph 6.1.4.3
52. 6.2Examples of inspection tests which may be carried out
53. 6.2.1Test on unfilled containers
54. 6.2.2Tests on filled aerosol dispensers
55. 6.3Tests on the flammability of aerosols
56. 6.3.1Ignition distance test for spray aerosols
57. 6.3.1.1Introduction
58. 6.3.1.1.1Paragraph 6.3.1.1.1
59. 6.3.1.1.2Paragraph 6.3.1.1.2
60. 6.3.1.2Apparatus and material
61. 6.3.1.2.1Paragraph 6.3.1.2.1
62. 6.3.1.3Procedure
63. 6.3.1.3.1General requirements
64. 6.3.1.3.1.1Paragraph 6.3.1.3.1.1
65. 6.3.1.3.1.2Paragraph 6.3.1.3.1.2
66. 6.3.1.3.1.3Paragraph 6.3.1.3.1.3
67. 6.3.1.3.1.4Paragraph 6.3.1.3.1.4
68. 6.3.1.3.1.5Paragraph 6.3.1.3.1.5
69. 6.3.1.3.1.6Paragraph 6.3.1.3.1.6
70. 6.3.1.3.2Test procedure
71. 6.3.1.3.2.1Paragraph 6.3.1.3.2.1
72. 6.3.1.3.2.2Paragraph 6.3.1.3.2.2
73. 6.3.1.3.2.3Paragraph 6.3.1.3.2.3
74. 6.3.1.4Method of assessing results
75. 6.3.1.4.1Paragraph 6.3.1.4.1
76. 6.3.2Enclosed space ignition test
77. 6.3.2.1Introduction
78. 6.3.2.2Apparatus and material
79. 6.3.2.2.1Paragraph 6.3.2.2.1
80. 6.3.2.2.2Preparation of test apparatus
81. 6.3.2.2.2.1Paragraph 6.3.2.2.2.1
82. 6.3.2.2.2.2Paragraph 6.3.2.2.2.2
83. 6.3.2.3Procedure
84. 6.3.2.3.1General requirements
85. 6.3.2.3.1.1Paragraph 6.3.2.3.1.1
86. 6.3.2.3.1.2Paragraph 6.3.2.3.1.2
87. 6.3.2.3.1.3Paragraph 6.3.2.3.1.3
88. 6.3.2.3.2Test procedure
89. 6.3.2.4Method of assessing results
90. 6.3.2.4.1Paragraph 6.3.2.4.1
91. 6.3.2.4.2Paragraph 6.3.2.4.2
92. 6.3.2.4.3Paragraph 6.3.2.4.3
93. 6.3.3Aerosol foam flammability test
94. 6.3.3.1Introduction
95. 6.3.3.1.1Paragraph 6.3.3.1.1
96. 6.3.3.2Apparatus and material
97. 6.3.3.2.1Paragraph 6.3.3.2.1
98. 6.3.3.2.2Paragraph 6.3.3.2.2
99. 6.3.3.2.3Paragraph 6.3.3.2.3
100. 6.3.3.3Procedure
101. 6.3.3.3.1General requirements
102. 6.3.3.3.1.1Paragraph 6.3.3.3.1.1
103. 6.3.3.3.1.2Paragraph 6.3.3.3.1.2
104. 6.3.3.3.1.3Paragraph 6.3.3.3.1.3
105. 6.3.3.3.2Test procedure
106. 6.3.3.4Method of assessing results
107. 6.3.3.4.1Paragraph 6.3.3.4.1