Regulation 10 Authorisation decision for vehicles
The DFI must determine an application for an authorisation to place a vehicle on the market by—
issuing an authorisation for the placing on the market of the vehicle, or
refusing the application for authorisation.
Where the DFI refuses an application under paragraph (1)(b), the applicant may, within the period of one month beginning with the day after the day on which the applicant receives notification of that decision, request through the one-stop shop that the DFI review its decision.
On receipt of a request for review of a decision in accordance with paragraph (2), the DFI must confirm or reverse that decision within two months beginning with the day after the day of receipt of the request for review.
The DFI must issue any authorisation for the placing on the market of a vehicle in accordance with the procedures set out in the Practical Arrangements Regulation and only where it is satisfied—
that an EC declaration of verification has been drawn up,
it has received the evidence referred to in regulation 8(1)(a) and (b),
that the vehicle has been so designed, constructed and installed as to meet the essential requirements relating to that subsystem when placed on the market,
that the vehicle’s technical compatibility with the network in the area of use specified in the application for authorisation on the basis of the relevant TSIs, notified national rules and relevant registers, and the common safety methods has been established, and
that the applicant has satisfactorily completed any checks required by the DFI under regulation 8(4).
Authorisations for placing a vehicle on the market must state—
the area of use,
the values of the parameters set out in the TSIs and, where applicable, in the notified national rules, for checking the technical compatibility between the vehicle and the area of use,
the vehicle’s compliance with the relevant TSIs and sets of notified national rules, relating to the parameters referred to in sub-paragraph (b), and
the conditions for use of the vehicle and other restrictions.
Subject to paragraph (12), where the holder of an authorisation seeks to change the area of use for any vehicle in respect of which that authorisation has been issued by the DFI under these Regulations, it must apply to the DFI for the authorisation to be updated by supplementing the application that was provided under regulation 8(1) for that vehicle with the relevant documents for the additional area of use.
The DFI must handle the application for the additional area of use in accordance with regulation 8(11) and issue an authorisation for placing on the market or a negative decision in accordance with paragraph (10).
Where the DFI has issued an authorisation in accordance with this regulation, that authorisation is valid without requiring an extension of the area of use for vehicles travelling to Irish border stations, provided that—
the DFI has consulted with the national safety authority in Ireland prior to issuing the authorisation, or
the DFI and the national safety authority in Ireland have entered into a cross border agreement in relation to vehicles travelling to stations near the border in each other’s territories.
Where the applicant indicates in its application that the intended area of use of the vehicle includes Irish border stations, the DFI may only issue an authorisation—
once the DFI has received confirmation from the national safety authority in Ireland that the relevant national rules notified under Article 14 of the 2016 Directive in Ireland and the obligations pertaining to any relevant cross-border agreements between DFI and the national safety authority in Ireland are met, and
if the authorisation states that it is valid in relation to Irish border stations without an extension of its area of use beyond Northern Ireland.
Subject to paragraph (11), the DFI must issue either an authorisation for placing a vehicle on the market or a negative decision within a reasonable time period communicated to the applicant in advance, and in any event, within the period of four months beginning with the day after the day on which the DFI receives the application or, where the DFI has specified that supplementary information is required in accordance with regulation 8(11)(b), within the period of four months beginning with the day after the day that information is received.
If the DFI has determined in accordance with regulation 18(1) that the whole or part of a TSI is not to apply (a “derogation”), it must not issue an authorisation for placing a vehicle on the market until—
in the circumstances described in regulation 18(2)(a) and (b), the European Commission has—
made a decision in respect of the derogation, or
in accordance with regulation 18(8), been deemed to permit the derogation, or
in the circumstance described in regulation 18(2)(c), it has communicated its determination to the European Commission.
Where the applicant seeks to change the area of use for a vehicle for which—
an authorisation has been issued by the European Union Agency for Railways, or
an authorisation has been issued by the DFI and the proposed change will result in the area of use extending further into Ireland than the Irish border stations,
its application for an updated authorisation must be made to the European Union Agency for Railways.
Where a vehicle has been authorised by the DFI under the 2011 Regulations or the Railways (Interoperability) Regulations 2006f1 (a “pre-2026 vehicle”), an applicant seeking a change in its area of use must apply under regulation 8 for an authorisation to place the vehicle on the market, such application to be made only in respect of the extension to the area of use.
Where an application for authorisation to place a vehicle on the market is made in order to extend the area of use of a pre-2026 vehicle, the applicant need not provide the items set out in regulation 8(1)(c) and (d).
Annotations
Footnotes
- f1
-
S.I. 2006/397, amended by S.I. 2011/3066.