OpenLegislation

Regulation 2 Interpretation

Original text. Later amendments are not shown.

In these Regulations—

  • “the 2008 Directive” means Directive 2008/57/EC of the European Parliament and of the Council of 17 June 2008 on the interoperability of the rail system within the Community (recast)f1;

  • “the 2011 Regulations” means the Railways (Interoperability) Regulations 2011f2;

  • “the 2016 Directive” means Directive (EU) 2016/797 of the European Parliament and of the Council of 11 May 2016 on the interoperability of the rail system within the European Unionf3, as amended from time to time;

  • “Agency Regulation” means Regulation (EU) 2016/796 of the European Parliament and of the Council of 11 May 2016 on the European Union Agency for Railways and repealing Regulation (EC) No 881/2004f4 as it has effect in EU law;

  • “approved body” has the meaning provided by regulation 2 of the 2011 Regulations;

  • “authorised representative” means any person established in the European Union or the United Kingdom who has received a written mandate from a manufacturer or a contracting entity to act on behalf of that manufacturer or contracting entity in relation to specified tasks;

  • “common safety methods” means the methods, developed pursuant to Article 6 of the Safety Directive, to describe how safety levels, achievement of safety targets, and compliance with other safety requirements are assessed, as revised and reissued from time to time;

  • “conformity assessment activity” means an activity related to the process of demonstrating whether specified requirements relating to a product, process, service, subsystem, person or body have been fulfilled;

  • “conformity assessment body” means an NI notified body or an NI designated body, or more than one of these as the case may be;

  • “contracting entity” means a person who contracts or intends to contract with another person for that other person to design, construct, renew or upgrade a subsystem;

  • “Conventional Directive” means Directive 2001/16/EC of the European Parliament and of the Council of 19 March 2001 on the interoperability of the trans-European conventional rail systemf5;

  • “design operating state” means the normal operating mode of an interoperability constituent, subsystem or vehicle, and its foreseeable degraded conditions, including wear, within the range and conditions of use specified in its technical and maintenance files;

  • “DFI” means the Department for Infrastructure established by Article 3 (1) of the Departments (Northern Ireland) Order 1999f6 and renamed by section 1 (6) of the Departments Act (Northern Ireland) 2016f7;

  • “EC certificate of verification” means a certificate drawn up by an EU notified body or an NI notified body as part of the EC verification assessment procedure for a structural subsystem;

  • “EC declaration of conformity or suitability for use” means a declaration constituting an attestation that an interoperability constituent has been subject to the procedures laid down in an applicable TSI for assessing conformity or suitability for use, drawn up in accordance with regulation 29 or in accordance with Articles 9 and 10 of the 2016 Directive;

  • “EC declaration of verification” means a declaration drawn up pursuant to regulation 20 or in accordance with Article 15 of the 2016 Directive;

  • “EC verification assessment procedure” means the procedure set out in Annex IV to the 2016 Directive;

  • “ERTMS” means the European Rail Traffic Management System described in paragraph 2.2 of Annex I to Commission Implementing Regulation (EU) 2023/1695 of 10 August 2023 on the technical specification for interoperability relating to the control-command and signalling subsystems of the rail system in the European Union and repealing Regulation (EU) 2016/919f8;

  • “essential requirements” has the meaning provided by paragraph (9) of Article 2 of the 2016 Directive, modified such that any reference to “Union law” in Annex III to that Directive is read as a reference to “relevant law”;

  • “EU notified body” means—

    1. (a)

      a body in an EEA state which has been notified to the European Commission in accordance with Chapter VI of the 2016 Directive, unless that body’s notification has been withdrawn, or

    2. (b)

      a body in Switzerland deemed competent to undertake conformity assessment activities in accordance with the 2016 Directive by a Decision of the Community/Switzerland Inland Transport Committeef9unless that body is no longer so deemed.

  • “European Commission” means the Commission of the European Union;

  • “European specification” has the meaning provided by Article 2 (10) of the 2016 Directive;

  • “European Union Agency for Railways” means the Agency established by the Agency Regulation;

  • “European Vehicle Register” means the European Vehicle Register developed in accordance with Article 47 (5) of the 2016 Directive;

  • “fixed installation” means any or all of the trackside control-command and signalling, energy and infrastructure subsystems specified in paragraph 1 (a) and described in paragraphs 2.1 to 2.3 of Annex II to the 2016 Directive;

  • “functional subsystem” means a subsystem as specified in paragraph 1 (b) of Annex II to the 2016 Directive;

  • “harmonised standard” has the meaning provided by paragraph 24 of Article 2 of the 2016 Directive;

  • “High-Speed Directive” means Council Directive 96/48/EC of 23 July 1996 on the interoperability of the trans-European high-speed rail systemf10;

  • “infrastructure manager” has the meaning provided in paragraph (2) of Article 3 of Directive 2012/34/EU of the European Parliament and of the Council of 21 November 2012 establishing a single European railway area (recast)f11;

  • “interoperability constituent”, save in the expression “UK interoperability constituent”, means any elementary component, group of components, sub-assembly or complete assembly of equipment incorporated or intended to be incorporated into a subsystem, upon which the interoperability of the rail system depends directly or indirectly, including both tangible objects and intangible objects;

  • “Irish border station” means a station in Ireland close to the border with Northern Ireland with network characteristics similar to stations in Northern Ireland;

  • “market surveillance authority” means the Health and Safety Executive for Northern Irelandf12;

  • “mobile subsystem” means the rolling stock subsystem and the on-board control-command and signalling subsystem;

  • “national safety authority in Ireland” means the body established in Ireland in accordance with paragraph (1) of Article 16 of the Safety Directive;

  • “network” means the lines, stations, terminals, and all kinds of fixed equipment needed to ensure safe and continuous operation of the rail system;

  • “NI designated body” means a person appointed in accordance with regulation 34(5), unless its appointment has been terminated;

  • “NI notified body” means a body that has been notified to the European Commission and the EEA states in accordance with regulation 34(1), unless its notification has been withdrawn;

  • “notified national rule” means a rule in use in Northern Ireland that has been implemented in the cases described in Article 13(2) or Article 14(4) of the 2016 Directive and notified by the DFI to the European Commission and the European Union Agency for Railways, as modified and further notified;

  • “one-stop shop” has the meaning provided by Article 12 of the Agency Regulation;

  • “operator”, in relation to the use of an interoperability constituent or a project subsystem, means the infrastructure manager or railway undertaking with management responsibility for that interoperability constituent or project subsystem for the time being;

  • “owner” in relation to a structural subsystem, means any person who has an estate or interest in, or right over that structural subsystem, and whose agreement is needed before another may use it;

  • “placing in service” means all the operations by which a subsystem is put into its design operating state, and cognate expressions are to be construed accordingly;

  • “placing on the market” means the first making available of an interoperability constituent, subsystem or vehicle, ready to function in its design operating state, on the market in Northern Ireland, and cognate expressions are to be construed accordingly;

  • “Practical Arrangements Regulation” means Commission Implementing Regulation (EU) 2018/545 of 4 April 2018 establishing practical arrangements for the railway vehicle authorisation and railway vehicle type authorisation process pursuant to Directive (EU) 2016/797 of the European Parliament and of the Councilf13 as it has effect in EU law;

  • “product” means a product obtained through a manufacturing process, including interoperability constituents and subsystems;

  • “project”, save in the expressions “project entity” and “project subsystem”, means a scheme for the construction, upgrading or renewal of the whole or part of any subsystem of the rail system, and where it is intended to carry out that construction, upgrading or renewal in parts, each of which are to be placed in service on a permanent basis independently of the other parts, it means any such part;

  • “project entity” means, in relation to a project, a contracting entity or manufacturer or the authorised representative of a contracting entity or manufacturer;

  • “project subsystem” means—

    1. (a)

      the whole of a structural subsystem which is subject to the requirement for authorisation under these Regulations, other than when the structural subsystem is subject to the requirement because part of it is being upgraded or renewed, or

    2. (b)

      in the case of a structural subsystem which is subject to the requirement for authorisation under these Regulations solely because part of it is being upgraded or renewed, that part of the structural subsystem;

  • “rail system”, save in the expression “UK rail system”, means the infrastructure composed of lines and fixed installations of the existing rail system in Northern Ireland plus the vehicles of all categories and origin travelling on that infrastructure;

  • “railway undertaking” has the meaning provided in point (1) of Article 3 of Directive 2012/34/EU of the European Parliament and of the Council of 21 November 2012 establishing a single European railway area (recast);

  • “RAMS” means Regulation (EC) No 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93f14 as it has effect in EU law;

  • “relevant register” means a register of infrastructure published in accordance with regulation 43 or the European Vehicle Register;

  • “relevant State” means—

    1. (a)

      Northern Ireland; or

    2. (b)

      any EEA state;

  • “renewal” means any major substitution work on a subsystem or part of a subsystem which does not change the overall performance of the subsystem, and cognate words are to be construed accordingly;

  • “Safety Directive” means Directive (EU) 2016/798 of the European Parliament and of the Council of 11 May 2016 on railway safety (recast)f15;

  • “structural subsystem” means a subsystem specified in paragraph 1 (a) of Annex II to the 2016 Directive;

  • “subsystem” save in the expressions “functional subsystem”, “mobile subsystem”, “project subsystem”, and “structural subsystem”, means the structural subsystems and functional subsystems referred to in paragraph 1 of Annex II to the 2016 Directive;

  • “technical specification”, save in the expression “technical specification for interoperability”, means a document that prescribes technical requirements to be fulfilled by a product, subsystem, process or service;

  • “Templates Regulation” means Commission Implementing Regulation (EU) 2019/250 of 12 February 2019 on the templates for ‘EC’ declarations and certificates for railway interoperability constituents and subsystems, on the model of declaration of conformity to an authorised railway vehicle type and on the ‘EC’ verification procedures for subsystems in accordance with Directive (EU) 2016/797 of the European Parliament and of the Council and repealing Commission Regulation (EU) No 201/2011f16 as it has effect in EU law;

  • “TSI” means a technical specification for interoperability adopted from time to time by the European Commission pursuant to the 2008 Directive, the Conventional Directive, the High-Speed Directive or the 2016 Directive, as that technical specification for interoperability has effect in EU law, and as it is amended from time to time;

  • “type”, in relation to a vehicle, means its set of technical design characteristics, as specified in the EC-type examination certificate relating to it, such certificate being that described in the verification module set out at Module SB (EC-Type Examination) in Annex I of Commission Decision of 9 November 2010/713/EU on modules for the procedures for assessment of conformity, suitability for use and EC verification to be used in the technical specifications for interoperability adopted under Directive 2008/57/EC of the European Parliament and of the Councilf17 as it has effect in EU law;

  • “UK interoperability constituent” means any elementary component, group of components, sub-assembly or complete assembly of equipment that is incorporated or intended to be incorporated into a subsystem upon which the interoperability of the UK rail system depends directly or indirectly; and the concept of a “constituent” covers both tangible objects and intangible objects such as software;

  • “UK national accreditation body” means the body appointed by the Secretary of State in accordance with Article 4 of Regulation (EC) No 765/2008 of the European Parliament and of the Council setting out the requirements for accreditation and market surveillance relating to the marketing of products and repealing Regulation (EEC) No 339/93f18;

  • “UK rail system” means the structure composed of lines and fixed installations of the existing rail system in the United Kingdom plus the vehicles of all categories and origin travelling on that infrastructure;

  • “UK(NI) indication” means the form of marking set out in Schedule 1 to the Product Safety and Metrology etc. (Amendment etc.) (UK(NI) Indication) (EU Exit) Regulations 2020f19;

  • “upgrading” means any major modification work on a subsystem or part of it which results in a change in the technical file accompanying the EC declaration of verification, if that technical file exists, and which improves the overall performance of the subsystem, and cognate words are to be construed accordingly;

  • “vehicle” means a railway vehicle that runs on its own wheels on railway lines with or without traction and is composed of one or more structural and functional subsystems or parts of such subsystems.

Annotations

Footnotes

f1

OJ L 191, 18.7.2008, p. 1.

f2

S.I. 2011/3066; relevant amending instruments are S.I. 2013/20422013/3023, 2014/3217, 2015/1682, 2015/2022, 2016/275, 2016/645, 2019/345, 2020/318.

f3

OJ L 138, 26.5.2016, p. 44.

f4

OJ L 138, 26.05.2016, p. 1.

f5

OJ L 110, 20.4.2001, p. 1.

f6

S.I. 1999/283 (N.I. 1), to which there are amendments not relevant to these Regulations.

f7

2016 c. 5 (N.I.).

f8

OJ L 222, 8.9.2023, p. 380.

f9

The Community/Switzerland Inland Transport Committee is a body responsible for monitoring and application of the provisions of an Agreement of 21 June 1999 between the European Community and the Swiss Confederation on the Carriage of Goods and Passengers by Rail and Road. The Agreement can be found here: https://eur-lex.europa.eu/legal-content/EN/TXT/?uri=OJ:L:2002:114:TOC.

f10

OJ L 235, 17.09.1996, p. 6.

f11

OJ L 343, 14.12.2012, p. 32.

f12

Formerly the Health and Safety Agency for Northern Ireland which was established under article 12 of the Health and Safety at Work (Northern Ireland) Order 1978 (S.I. 1978/1039 (N.I. 9)). It became the Health and Safety Executive for Northern Ireland by virtue of article 3(1) of the Health and Safety at Work (Amendment) (Northern Ireland) Order 1998 (S.I. 1998/2795 (N.I. 18)).

f13

OJ L 90, 6.4.2018, p. 66.

f14

OJ L 218, 13.8.2008, p. 30.

f15

OJ L 138, 26.05.2016, p. 102.

f16

OJ L 42, 13.2.2019, p. 9.

f17

OJ L 319, 4.12.2010, p. 1.

f18

EUR 765/2008, as amended by S.I. 2019/696, 2019/1246, 2020/852, S.I. 2020/1359, 2020/1460, 2023/959 and 2025/82.

f19

S.I. 2020/1460, to which there are amendments not relevant to these Regulations.