OpenLegislation

Division 5.1 CONTROL-COMMAND INTEROPERABILITY CONSTITUENTS

United Kingdom

Original text. Later amendments are not shown.

As described in section 2, the control-command subsystem is divided into two assemblies, trackside and on-board. An interoperability constituent can only belong to one of these assemblies.

The interoperability constituents in the control-command subsystem are listed in Tables 5.1 and 5.2:

  • Table 5.1 lists the interoperability constituents of the control-command on-board assembly.

  • Table 5.2 lists the interoperability constituents of the control-command trackside assembly.

Column 1lists line number,
Column 2is the name of the interoperability constituent,
Column 2alists remarks, if any,
Column 3lists the interfaces which are internal to the control-command TSI subsystem; an asterisk in this column indicates that a supporting European standard is not yet available,
Column 4lists the interfaces to other TSI subsystems (external control-command interfaces),
Column 5lists the characteristics to be assessed by reference to Annex A, which lists the relevant European specifications including test requirements,
Column 6lists the modules (see Annex E) to be applied for assessment.

For each interoperability constituent the reference to European specifications to be applied is given in Annex A.

These interoperability constituents are specific to railway applications.