Division 8.2.3.3 AdjustmentF1
The chassis dynamometer load setting shall be adjusted using the following equation:
therefore:
where:
F*dj Fej Fsj Ftj A*d, B*d and C*d r′
is the new chassis dynamometer setting load, N;
is the adjustment road load equal to (Fsj – Ftj), Nm;
is the simulated road load at reference speed vj, Nm;
is the target road load at reference speed vj, Nm;
are the new chassis dynamometer setting coefficients;
is the dynamic radius of the tyre on the chassis dynamometer obtained at 80 km/h, m.
Paragraphs 8.2.2. and 8.2.3. shall be repeated until the tolerance in paragraph 8.2.3.2. is met.