OpenLegislation

Division 4.4.4.2 Determination of the phase-specific and city equivalent all-electric rangeF1

Original text. Later amendments are not shown.

The phase-specific and city equivalent all-electric range shall be calculated using the following equation:

EAERp=MCO2,CS,p−MCO2,CD,avg,pMCO2,CS,p×∑kj=1ΔEREESS,jECDC,CD,p

where:

EAERp
  • is the equivalent all-electric range for the considered period p, km;

  • MCO2,CS,p
  • is the phase-specific CO2 mass emission from the charge-sustaining Type 1 test for the considered period p according to Table A8/5, step no. 7, g/km;

  • ΔEREESS,j
  • are the electric energy changes of all REESSs during the considered phase j, Wh;

  • ECDC,CD,p
  • is the electric energy consumption over the considered period p based on the REESS depletion, Wh/km;

  • j
  • is the index number of the considered phase;

  • k
  • is the number of phases driven up to the end of the transition cycle n according to paragraph 3.2.4.4 of this Sub-Annex;

  • and

    MCO2,CD,avg,p=∑ncc=1MCO2,CD,p,c×dp,c∑ncc=1dp,c

    where:

    MCO2,CD,avg,p
  • is the arithmetic average charge-depleting CO2 mass emission for the considered period p, g/km;

  • MCO2,CD,p,c
  • is the CO2 mass emission determined according to paragraph 3.2.1. of Sub-Annex 7 of period p in cycle c of the charge-depleting Type 1 test, g/km;

  • dp,c
  • is the distance driven in the considered period p of cycle c of the charge-depleting Type 1 test, km;

  • c
  • is the index number of the considered applicable WLTP test cycle;

  • p
  • is the index of the individual period within the applicable WLTP test cycle;

  • nc
  • is the number of applicable WLTP test cycles driven up to the end of the transition cycle n according to paragraph 3.2.4.4. of this Sub-Annex;

  • and

    ECDC,CD,p=∑ncc=1ECDC,CD,p,c×dp,c∑ncc=1dp,c

    where:

    ECDC,CD,p
  • is the electric energy consumption of the considered period p based on the REESS depletion of the charge-depleting Type 1 test, Wh/km;

  • ECDC,CD,p,c
  • is the electric energy consumption of the considered period p of cycle c based on the REESS depletion of the charge-depleting Type 1 test according to paragraph 4.3. of this Sub-Annex, Wh/km;

  • dp,c
  • is the distance driven in the considered period p of cycle c of the charge-depleting Type 1 test, km;

  • c
  • is the index number of the considered applicable WLTP test cycle;

  • p
  • is the index of the individual period within the applicable WLTP test cycle;

  • nc
  • is the number of applicable WLTP test cycles driven up to the end of the transition cycle n according to paragraph 3.2.4.4. of this Sub-Annex.

  • The considered phase values shall be the low-phase, medium-phase, high-phase, extra high-phase, and the city driving cycle.

    Annotations

    Textual amendments

    F1

    Substituted by Commission Regulation (EU) 2018/1832 of 5 November 2018 amending Directive 2007/46/EC of the European Parliament and of the Council, Commission Regulation (EC) No 692/2008 and Commission Regulation (EU) 2017/1151 for the purpose of improving the emission type approval tests and procedures for light passenger and commercial vehicles, including those for in-service conformity and real-driving emissions and introducing devices for monitoring the consumption of fuel and electric energy (Text with EEA relevance).