Appendix 8

In the case of a vehicle being type approved accordant to this Annex, the cabin shall bear:

1. 1.1.

   F1The manufacturer's name or trade mark

2. 1.2

   The make and identifying type indication as recorded in the information referred to in paragraph 0.2 and 0.3 of Appendix 2 to this Annex

3. 1.3

   F2The certification mark as a rectangle surrounding the lower-case letter ‘g’ followed by the number 11.

4. 1.4

   The certification mark shall also include in the vicinity of the rectangle the ‘base certification number’ as specified for Section 4 of the type-approval number set out in F3point 2.4 of Annex IV to Commission Implementing Regulation (EU) 2020/683 , preceded by the two figures indicating the sequence number assigned to the latest technical amendment to this Regulation and by a character ‘P’ indicating that the approval has been granted for an air drag.

   For this Regulation, the sequence number shall be 00.

   1.4.1

   Example and dimensions of the certification mark F4

   

   The above certification mark affixed to a cabin shows that the type concerned has been approved F5... pursuant to this Regulation. The first two digits (00) are indicating the sequence number assigned to the latest technical amendment to this Regulation. The following letter indicates that the certificate was granted for an air drag (P). The last four digits (0004) are those allocated by the type-approval authority to the engine as the base certification number.

5. 1.5

   The certification mark shall be affixed to the cabin in such a way as to be indelible and clearly legible. It shall be visible when the cabin is installed on the vehicle and shall be affixed to a part necessary for normal cabin operation and not normally requiring replacement during cabin life. The markings, labels, plates or stickers must be durable for the useful life of the cabin and must be clearly legible and indelible. The manufacturer shall ensure that the markings, labels, plates or sticker cannot be removed without destroying or defacing them.

Certification number for air drag shall comprise the following:

F6g11*YYYY/YYYY*ZZZZ/ZZZZ*P*0000*00