The New Heavy-Duty Vehicles (Carbon Dioxide Emission Performance Standards) (Vocational Vehicles) Regulations 2025
S.I. 2025/794 · Made 2 July 2025
ROAD TRAFFIC
ENVIRONMENTAL PROTECTION
Made 2nd July 2025
Laid before Parliament 7th July 2025
Coming into force 29th July 2025
The Secretary of State makes these Regulations in exercise of the powers conferred by Article 2(3) of Regulation (EU) 2019/1242 of the European Parliament and of the Council of 20 June 2019 setting CO2 emission performance standards for new heavy-duty vehiclesf1.
Annotations to the whole text
Footnotes
- f1
-
EUR 2019/1242. Article 2 was amended by S.I. 2020/1402, 2022/1361 and 2025/367.
Contents
- 1Citation, commencement and extent
- 2Interpretation
- 3Identification of misreported vehicles
- 4Procedure for correcting average specific CO2 emissions
- Signature
- Schedule: Formula for correcting average specific CO2 emissions
- 1Paragraph 1
- 2Paragraph 2
- Explanatory note
1Citation, commencement and extent
These Regulations may be cited as the New Heavy-Duty Vehicles (Carbon Dioxide Emission Performance Standards) (Vocational Vehicles) Regulations 2025 and come into force on 29th July 2025.
These Regulations extend to England and Wales, Scotland and Northern Ireland.
2Interpretation
In these Regulations—
-
“Commission Regulation (EU) 2017/2400” means Commission Regulation (EU) 2017/2400 of 12 December 2017 implementing Regulation (EC) No 595/2009 of the European Parliament and of the Council as regards the determination of the CO2 emissions and fuel consumption of heavy-duty vehicles and amending Directive 2007/46/EC of the European Parliament and of the Council and Commission Regulation (EU) No 582/2011f1;
-
“heavy-duty vehicle” means a vehicle to which any of points (a) to (d) of Article 2(1) of Regulation (EU) 2019/1242 apply;
-
“manufacturer” has the meaning given in Article 3(10) of Regulation (EU) 2019/1242f2;
-
“misreported vehicle” means a heavy-duty vehicle that—
- (a)
was certified as a vocational vehicle based on the data reported by the manufacturer in accordance with Article 5 of Regulation (EU) 2018/956f3; and
- (b)
was registered as a non-vocational vehicle based on the data reported to the Secretary of State in accordance with Article 4 of Regulation (EU) 2018/956;
- (a)
-
“non-vocational vehicle” means a heavy-duty vehicle other than a vocational vehicle;
-
“Regulation (EU) 2018/956” means Regulation (EU) 2018/956 of the European Parliament and of the Council on the monitoring and reporting of CO2 emissions from and fuel consumption of new heavy-duty vehiclesf4;
-
“Regulation (EU) 2019/1242” means Regulation (EU) 2019/1242 of the European Parliament and of the Council setting CO2 emission performance standards for new heavy-duty vehicles and amending Regulations (EC) No 595/2009 and (EU) 2018/956 of the European Parliament and of the Council and Council Directive 96/53/EC;
-
“vocational vehicle” has the meaning given in Article 3(16) of Commission Regulation (EU) 2017/2400.
3Identification of misreported vehicles
Where a misreported vehicle is identified, the Secretary of State must notify the manufacturer of the vehicle.
Within one month of receiving a notification under paragraph (1), a manufacturer may provide to the Secretary of State information to show that the vehicle was correctly certified as a vocational vehicle.
Where, following receipt of any information under paragraph (2), the Secretary of State considers that a misreported vehicle was incorrectly certified as a vocational vehicle, the Secretary of State must correct the manufacturer’s average specific CO2 emissionsf1 for the reporting period of the relevant yearf2 to take that vehicle into account.
4Procedure for correcting average specific CO2 emissions
The Secretary of State may correct a manufacturer’s average specific CO2 emissions using the correct CO2 values of a misreported vehicle.
Where the correct CO2 values of a misreported vehicle are not already available, the Secretary of State may request that a manufacturer determine the correct CO2 values according to the technical characteristics of that vehicle.
Where a manufacturer determines the correct CO2 values of a misreported vehicle following a request under paragraph (2), the manufacturer must use the same version of the simulation tool as used for the original determination of the CO2 values of that vehicle, unless the Secretary of State permits otherwise.
Where a manufacturer fails to determine the correct CO2 values of a misreported vehicle within two months of receiving a request under paragraph (2), the Secretary of State may correct the manufacturer’s average specific CO2 emissions using the formula set out in the Schedule.
In this regulation—
-
“correct CO2 values” means the CO2 emissions and fuel consumption of a misreported vehicle as a non-vocational vehicle, determined using the simulation tool in accordance with Commission Regulation (EU) 2017/2400;
-
“simulation tool” means an electronic tool used to determine CO2 emissions and fuel consumption of vehicles as provided for in Article 5 of Commission Regulation (EU) 2017/2400.
Signature
Signed by authority of the Secretary of State
Lilian Greenwood
Parliamentary Under Secretary of State
Department for Transport
2nd July 2025
1
Where regulation 4(4) applies, the average specific CO2 emissions of the manufacturer must be corrected as follows for the reporting period of the relevant year:
where—
-
avgCO2sg is the average specific CO2 emissions of the manufacturer defined in Annex I, point 2.2. of Regulation (EU) 2019/1242;
-
Vsg is the number of new heavy-duty vehicles of the manufacturer in the vehicle sub-group sg, excluding vocational vehicles, in accordance with Article 4(a) of Regulation (EU) 2019/1242;
-
ΣV is the sum over all heavy-duty vehicles of the manufacturer in the vehicle sub-group sg, in accordance with regulation 3(3);
-
CO2Vv is the average of the CO2 emissions in g/tkm of the vocational vehicle v for all different combinations of mission profiles, load conditions and fuel types, reported in accordance with Regulation (EU) 2018/956;
-
Vocsg is the number of heavy-duty vehicles of the manufacturer in the vehicle sub-group sg, in accordance with regulation 3(3).
2
The corrected average specific CO2 emissions of the manufacturer (avgCO2sg)corr must replace the average specific CO2 emissions of the manufacturer avgCO2sg for the purposes of Regulation (EU) 2019/1242.
Explanatory note
(This note is not part of the Regulations)
These Regulations introduce a procedure to identify heavy-duty vehicles that have been misreported as vocational vehicles and to correct such misreporting for the purposes of Regulation (EU) 2019/1242.
Regulation (EU) 2019/1242 sets CO2 emission performance standards for new heavy-duty vehicles, exempting vocational vehicles from the calculation of average specific CO2 emissions which inform the CO2 emissions reduction target set for each manufacturer.
These Regulations enable the Secretary of State to ensure that vehicles which were incorrectly certified as vocational vehicles are not exempt from manufacturers’ average specific CO2 emissions calculations.
These Regulations enable the Secretary of State to engage with manufacturers to obtain the correct information regarding such vehicles, and to amend the calculation of the average specific CO2 emissions of such manufacturers accordingly.
A full impact assessment has not been produced for this instrument as no, or no significant, impact on the private, voluntary or public sector is foreseen.
These Regulations, along with an Explanatory Memorandum, are available on the UK legislation website at http://www.legislation.gov.uk.