Regulation 12 Type authorisation
If the DFI issues an authorisation in accordance with regulation 10 the DFI must also issue an authorisation of vehicle type in relation to the relevant vehicle in respect of the same area of use as that vehicle.
An application may be made to the DFI for authorisation of a vehicle type through the one-stop shop, in accordance with the Practical Arrangements Regulation.
Where the applicant indicates in its application under paragraph (2) that the intended area of use of vehicles of the relevant type includes Irish border stations, the DFI may only issue an authorisation of vehicle type if—
the DFI has received confirmation from the national safety authority in Ireland that the relevant national rules notified under Article 14 of the 2016 Directive in Ireland and the obligations pertaining to any relevant cross-border agreements are met, and
the authorisation states that the authorisation is valid in relation to the Irish border stations without an extension of the area of use.
The DFI must ensure that an authorisation of vehicle type issued under paragraph (1), or under Article 46 of the Practical Arrangements Regulation following an application under paragraph (2)—
describes the basic design characteristics of the vehicle, and
is registered with the European register of authorised types of vehicles established by the European Union Agency for Railways in accordance with Commission Implementing Decision 2011/665/EU of 4 October 2011 on the European register of authorised types of railway vehiclesf1 as it has effect in EU law.
Where an applicant is applying for authorisation to place a vehicle or series of vehicles on the market in reliance on a declaration of conformity to an authorised type (such declaration of conformity to be established in accordance with paragraph (8)), its application must be submitted in accordance with regulation 8, save that where an application is made under this paragraph, paragraphs (1), (4) and (5) of regulation 8 do not apply.
The DFI must determine any application made under paragraph (5) in accordance with regulation 10, save that for applications under paragraph (5)regulation 10(4) does not apply.
The DFI must not grant an authorisation on the basis of an application made under paragraph (5) unless it is satisfied that the vehicle or series of vehicles in respect of which the application is made conforms to the description set out in the authorisation of vehicle type.
The declaration of conformity to an authorised type referred to in paragraph (5) must be—
consistent with the Templates Regulation,
established in accordance with—
the verification procedures of the relevant TSIs, or
where TSIs do not apply, the conformity assessment procedures as defined in modules B, D, F and H1 in Annex 2 to Decision No 768/2008/EC of the European Parliament and of the Council of 9 July 2008 on a common framework for the marketing of products and repealing Council Decision 93/465/EECf2 as it has effect in EU law.
Where the DFI has granted an authorisation to place a vehicle or series of vehicles on the market following an application under paragraph (5), it need not issue a further authorisation of vehicle type under paragraph (1).
Where an authorisation of a vehicle type needs to be renewed as referred to in regulation 13(3), the checks performed by the DFI may only concern the applicable changes to the TSI or notified national rule.
In this regulation, “conforms” means conforms in all the respects which materially affect compliance with the applicable essential requirements.
Annotations
Footnotes
- f1
-
OJ L 264, 8.10.2011, p. 32.
- f2
-
OJ L 218, 13.8.2008, p. 82.