OpenLegislation

The Ecodesign for Energy-Related Products and Energy Information (Lighting Products) Regulations 2021 in England

Draft. This instrument was laid in draft and may differ from the one made. Look for the made version under its title.

Draft 2021, ISBN 9780348225488

Original text. legislation.gov.uk does not revise statutory instruments, so later amendments are not shown here. Changes made to it are listed under each provision when known.

Draft Regulations laid before Parliament under regulation 24(1)(b) of the Ecodesign for Energy-Related Products Regulations 2010 and Article 11A(2)(b) of Regulation (EU) 2017/1369 of the European Parliament and of the Council setting a framework for energy labelling, for approval by resolution of each House of Parliament.

Energy Conservation

Made ***

Coming into force in accordance with regulation 1(2) and (3)

The Secretary of State makes these Regulations in exercise of the powers conferred by regulations 22(1) and 24(2) of the Ecodesign for Energy-Related Products Regulations 2010f1 (“the 2010 Regulations”) and Articles 11(3) and 11A(3) of Regulation (EU) 2017/1369 of the European Parliament and of the Council setting a framework for energy labellingf2 (“the Framework Regulation”).

A draft of this instrument was laid before Parliament in accordance with regulation 24(1)(b) of the 2010 Regulations and Article 11A(2)(b) of the Framework Regulation, and approved by a resolution of each House of Parliament.

For the purposes of paragraph (1) of regulation 22 of the 2010 Regulations, the Secretary of State considers that the matters set out in paragraphs (2) and (6) of that regulation are satisfied. The Secretary of State has complied with paragraph (4) of regulation 22 of those Regulations.

For the purposes of paragraph (3) of Article 11 of the Framework Regulation, the Secretary of State considers that the conditions set out in paragraph (1)(a) to (d) of that Article are satisfied. The Secretary of State has complied with paragraph (2) of Article 11 of that Regulation.

Annotations to the whole text

Footnotes

f1

S.I. 2010/2617; regulations 22 to 24 were inserted by S.I. 2019/539, as amended by S.I. 2020/1528.

f2

EUR 2017/1369; Article 11 was substituted, and Article 11A was inserted, by S.I. 2019/539, as amended by S.I. 2020/1528.

Contents

  1. Part 1: INTRODUCTION
  2. 1Citation, commencement and extent
  3. Part 2: ECODESIGN AND ENERGY LABELLING FOR LIGHT SOURCES AND SEPARATE CONTROL GEARS
  4. Chapter 1: GENERAL
  5. Interpretation
  6. Chapter 2: ECODESIGN FOR LIGHT SOURCES AND SEPARATE CONTROL GEARS
  7. 3Application
  8. 4Ecodesign requirements
  9. 5Exemptions
  10. 6Removal of light sources and separate control gears
  11. 7Conformity assessment
  12. 8Verification procedure for market surveillance purposes
  13. 9Measurements and calculations
  14. 10Circumvention and software updates
  15. Chapter 3: ENERGY LABELLING OF LIGHT SOURCES
  16. 11Application
  17. 12Obligations of suppliers
  18. 13Obligations of dealers
  19. 14Obligations of internet hosting platforms
  20. 15Measurement methods
  21. 16Verification procedure for market surveillance purposes
  22. 17Light sources placed on the market before 1st October 2021
  23. Part 3: GENERAL
  24. 18Review
  25. 19Revocations
  26. 20Consequential amendments of the 2010 Regulations
  27. 21Consequential amendments of the Energy Information Regulations 2011
  28. 22Transitional and saving provisions in connection with ecodesign requirements
  29. 23Transitional and saving provisions in connection with energy labelling requirements
  30. Signature
  31. Schedule 1: Interpretation
  32. 1Interpretation
  33. Schedule 2: Verification procedure for market surveillance purposes
  34. 1Interpretation
  35. 2Verification procedure
  36. 3Verification procedure
  37. 4Verification procedure
  38. 5Verification procedure
  39. 6Verification procedure
  40. 7Verification procedure
  41. 8Verification tolerances
  42. Schedule 3Ecodesign requirements for light sources and separate control gears
  43. 3Functional requirements
  44. 4Information requirements
  45. Light sources
  46. 5Paragraph 5
  47. Packaging
  48. Light sources
  49. 6Paragraph 6
  50. Separate control gears
  51. 7Paragraph 7
  52. Websites
  53. 8Paragraph 8
  54. 9Technical documentation
  55. 10Information for products specified in paragraph 3 of Schedule 4
  56. 11Reference control settings
  57. Schedule 4: Exemptions
  58. 1Specified approvals
  59. 2Additional exemptions
  60. 3Limited exemptions
  61. Schedule 5: Functionality after endurance testing
  62. 1Paragraph 1
  63. 2Paragraph 2
  64. Schedule 6: Exemptions
  65. 1Paragraph 1
  66. 2Paragraph 2
  67. 3Paragraph 3
  68. Schedule 7: Labels for light sources
  69. 1Format and placing of labels
  70. 2Format and placing of labels
  71. 3Label designs
  72. Schedule 8: Product information
  73. 1Product information sheet
  74. 2Product information sheet
  75. 3Information to be displayed for a containing product
  76. 4Information to be displayed on the supplier’s website
  77. Schedule 9: Technical documentation
  78. 1Paragraph 1
  79. Schedule 10: Information to be provided in visual advertisements, technical promotional material, and in distance selling except distance selling on the internet
  80. 1Paragraph 1
  81. 2Paragraph 2
  82. 3Paragraph 3
  83. 4Paragraph 4
  84. Schedule 11: Information to be provided in the case of distance selling through the internet
  85. 1Paragraph 1
  86. 2Paragraph 2
  87. 3Paragraph 3
  88. 4Paragraph 4
  89. 5Paragraph 5
  90. Schedule 12: Energy labelling of light sources – energy efficiency classes and calculation method
  91. 1Paragraph 1
  92. Schedule 13: Verification procedure for market surveillance purposes
  93. 1Interpretation
  94. 2Verification procedure
  95. 3Verification procedure
  96. 4Verification procedure
  97. 5Verification procedure
  98. 6Verification procedure
  99. 7Verification tolerances
  100. Explanatory note