OpenLegislation

The Measuring Instruments Regulations 2016 in Northern Ireland

S.I. 2016/1153 · Made 29 November 2016 · Extends to United Kingdom

Not fully up to date. 2 changes made by later legislation have not yet been written into this text, which is revised to 27 February 2025.

See the changes not yet applied
ProvisionChangeMade by
Sch. 5 para. 1(1)word omittedTreatment of Conformity Assessment Bodies (Comprehensive Economic and Trade Agreement between the Government of Great Britain and Northern Ireland and the Government of the Republic of India) 2026 reg. 9(a)
Sch. 5 para. 1(1)(c) and wordinsertedTreatment of Conformity Assessment Bodies (Comprehensive Economic and Trade Agreement between the Government of Great Britain and Northern Ireland and the Government of the Republic of India) 2026 reg. 9(b)

Weights And Measures

Made 29th November 2016

Laid before Parliament 6th December 2016

Coming into force 28th December 2016

M1M2The Secretary of State is a Minister designated for the purposes of section 2(2) of the European Communities Act 1972 in relation to, and for purposes ancillary to, the regulation of specifications, construction, placing on the market and use of articles, instruments, containers or other equipment intended for weighing, measuring or testing.

These Regulations make provision for a purpose mentioned in section 2(2) of the European Communities Act 1972 and it appears to the Secretary of State that it is expedient for certain references to provisions of EU instruments to be construed as references to those provisions as amended from time to time.

The Secretary of State makes the following Regulations in exercise of the powers conferred by section 2(2) of, and paragraph 1A M3 of Schedule 2 to that Act and, in relation to Part 6 of the Regulations (and any other provisions of these Regulations to the extent that they apply to, or give effect to, Part 6), in exercise of powers conferred by sections 15(1) and 86(1) of the Weights and Measures Act 1985 M4.C1

Annotations to the whole text

Marginal citations

M1

S.I. 1975/427.

M2

1972 c.68. Section 2(2) was amended by the Legislative and Regulatory Reform Act 2006 (c.51), section 27(1) and the European Union (Amendment) Act 2008 (c.7), Schedule, Part 1.

M3

Paragraph 1A of Schedule 2 was inserted by section 28 of the Legislative and Regulatory Reform Act 2006 and amended by the European Union (Amendment) Act 2008, Schedule, Part 1.

M4

1985 c.72.

Modifications

C1

Regulations modified (E.W.S.) (19.6.2021) by The Conformity Assessment (Mutual Recognition Agreements) and Weights and Measures (Intoxicating Liquor) (Amendment) Regulations 2021 (S.I. 2021/730), regs. 1, 4, Sch. 1 para. 7

Contents

  1. Part 1: INTRODUCTORY
  2. 1Citation, commencement and extent
  3. 4Revocations and transitional and consequential provisions
  4. 5Exception for trade fairs, exhibitions and demonstration
  5. Part 2: REGULATED MEASURING INSTRUMENTS – OBLIGATIONS OF ECONOMIC OPERATORS
  6. Chapter 1: OBLIGATIONS OF MANUFACTURERS AND PERSONS TO BE TREATED AS MANUFACTURERS
  7. 6Introductory
  8. 8Manufacturers – obligations in respect of records
  9. 10Manufacturers' obligations in relation to the marking of regulated measuring instruments with serial numbers etc.
  10. 14Provision of information to the competent authority
  11. Chapter 2: OBLIGATIONS OF IMPORTERS
  12. 18Importers duty to notify manufacturer and market surveillance authorities of non-compliant regulated measuring instruments that present a risk
  13. 21Duty of importers to ensure proper conditions of storage and transport
  14. 22Duties of importers with regard to monitoring etc.
  15. 23Action to be taken by importers where regulated measuring instruments placed on the market by them are not in conformity with essential requirements
  16. 24Requirement for importer to keep copy of EU declaration of conformity
  17. 25Provision of information to the competent authority
  18. Chapter 3: OBLIGATIONS OF DISTRIBUTORS
  19. 26Introductory
  20. 27Distributors – duty to act with due care
  21. 29Distributors not to make non-conforming regulated measuring instruments available on the market etc.
  22. 30Duty of distributors to ensure proper conditions of storage and transport
  23. 31Action to be taken by distributors where regulated measuring instruments placed on the market by them are not in conformity with essential requirements
  24. 32Provision of information to the competent authority
  25. Chapter 4: IDENTIFICATION OF ECONOMIC OPERATORS
  26. 33Regulation 33
  27. Part 3: NON-PRESCRIBED MEASURING INSTRUMENTS
  28. 34Introductory
  29. 35Establishing compliance with the essential requirements – non-prescribed measuring instruments
  30. Part 4: CONFORMITY OF MEASURING INSTRUMENTS
  31. Chapter 1: ESTABLISHING COMPLIANCE WITH THE ESSENTIAL REQUIREMENTS
  32. Chapter 2: REQUIREMENTS AS TO THE TECHNICAL DOCUMENTATION REQUIRED FOR THE PURPOSES OF CONFORMITY ASSESSMENT
  33. 43Application of this Chapter
  34. Chapter 3: REQUIREMENTS RELATING TO EU DECLARATIONS OF CONFORMITY
  35. Chapter 4: CONFORMITY MARKING
  36. 52AUK(NI) indication
  37. 52BRegister of notified bodies established in the United Kingdom
  38. Part 5: APPROVAL OF CONFORMITY ASSESSMENT BODIES
  39. 61Regulation 61
  40. Part 7: MARKET SURVEILLANCE AND ENFORCEMENT
  41. Chapter 1: MARKET SURVEILLANCE
  42. 62The market surveillance authority
  43. 64EU safeguard procedure
  44. 66Provisions as to directions under regulations 63 and 65
  45. Chapter 2: ENFORCEMENT AUTHORITIES AND PROCEDURES
  46. 67Enforcement of the Regulations
  47. 70Review of enforcement decisions of a competent authority
  48. 71Offence of failure to comply with an enforcement notice
  49. 73Re-qualification
  50. 74Testing of regulated measuring instruments
  51. Part 8: OFFENCES
  52. 76Offences by economic operators etc.
  53. 77Penalties for offences
  54. 78Defence of due diligence
  55. 79Liability of persons other than the principal offender
  56. Part 9: MISCELLANEOUS AND SUPPLEMENTAL
  57. 80Service of documents etc.
  58. 81Review
  59. Signature
  60. Schedule A1: Disqualification and re-qualification marks
  61. 1Disqualification mark
  62. 2Re-qualification mark
  63. Schedule 1: ESSENTIAL REQUIREMENTS AND APPLICABLE CONFORMITY ASSESSMENT PROCEDURES
  64. 1Introductory
  65. 2Water Meters
  66. 3Gas meters
  67. 4Volume conversion devices
  68. 5Active electrical energy meters
  69. 6Thermal Energy Meters
  70. 7Non-water liquid measuring systems
  71. 8Automatic weighing instruments
  72. 9Taximeters
  73. 10Material measures of length
  74. 11Capacity serving measures
  75. 12Dimensional measuring instruments
  76. 13Exhaust gas analysers
  77. 1Allowable Errors Repealed
  78. 1.1Paragraph 1.1
  79. 1.2Paragraph 1.2
  80. 1.3Paragraph 1.3
  81. 1.3.1Paragraph 1.3.1
  82. 1.3.2Paragraph 1.3.2
  83. 1.3.3Paragraph 1.3.3
  84. 1.3.4Paragraph 1.3.4
  85. 1.4Paragraph 1.4
  86. 1.4.1Paragraph 1.4.1
  87. 1.4.2Paragraph 1.4.2
  88. 2Reproducibility
  89. 3Repeatability
  90. 4Discrimination and Sensitivity
  91. 5Durability
  92. 6Reliability
  93. 7Suitability Repealed
  94. 7.1Paragraph 7.1
  95. 7.2Paragraph 7.2
  96. 7.3Paragraph 7.3
  97. 7.4Paragraph 7.4
  98. 7.5Paragraph 7.5
  99. 7.6Paragraph 7.6
  100. 8Protection against corruption Repealed
  101. 8.1Paragraph 8.1
  102. 8.2Paragraph 8.2
  103. 8.3Paragraph 8.3
  104. 8.4Paragraph 8.4
  105. 8.5Paragraph 8.5
  106. 9Information to be borne by and to accompany the instrument Repealed
  107. 9.1Paragraph 9.1
  108. 9.2Paragraph 9.2
  109. 9.3Paragraph 9.3
  110. 9.4Paragraph 9.4
  111. 9.5Paragraph 9.5
  112. 9.6Paragraph 9.6
  113. 9.7Paragraph 9.7
  114. 9.8Paragraph 9.8
  115. 10Indication of result Repealed
  116. 10.1Paragraph 10.1
  117. 10.2Paragraph 10.2
  118. 10.3Paragraph 10.3
  119. 10.4Paragraph 10.4
  120. 10.5Paragraph 10.5
  121. 11Further processing of data to conclude the trading transaction Repealed
  122. 11.1Paragraph 11.1
  123. 11.2Paragraph 11.2
  124. 12Conformity evaluation
  125. Part MODULE A2:: INTERNAL PRODUCTION CONTROL PLUS SUPERVISED INSTRUMENT CHECKS AT RANDOM INTERVALS
  126. 1Paragraph 1
  127. 2Technical documentation
  128. 3Manufacturing
  129. 4Instrument checks
  130. 5Conformity marking and declaration of conformity Repealed
  131. 5.1Paragraph 5.1
  132. 5.2Paragraph 5.2
  133. 6Authorised representative
  134. Part MODULE B: TYPE EXAMINATION
  135. 1Paragraph 1
  136. 2Paragraph 2
  137. 3Paragraph 3
  138. 4Paragraph 4
  139. 4.1Paragraph 4.1
  140. 4.2Paragraph 4.2
  141. 4.3Paragraph 4.3
  142. 4.4Paragraph 4.4
  143. 4.5Paragraph 4.5
  144. 4.6Paragraph 4.6
  145. 5Paragraph 5
  146. 6Paragraph 6
  147. 7Paragraph 7
  148. 8Paragraph 8
  149. 9Paragraph 9
  150. 10Paragraph 10
  151. 11Paragraph 11
  152. Part MODULE D:: CONFORMITY TO TYPE BASED ON QUALITY ASSURANCE OF THE PRODUCTION PROCESS
  153. 1Paragraph 1
  154. 2Manufacturing
  155. 3Quality system Repealed
  156. 3.1Paragraph 3.1
  157. 3.2Paragraph 3.2
  158. 3.3Paragraph 3.3
  159. 3.4Paragraph 3.4
  160. 3.5Paragraph 3.5
  161. 4Surveillance under the responsibility of the approved body Repealed
  162. 4.1Paragraph 4.1
  163. 4.2Paragraph 4.2
  164. 4.3Paragraph 4.3
  165. 4.4Paragraph 4.4
  166. 5Conformity marking and declaration of conformity Repealed
  167. 5.1Paragraph 5.1
  168. 5.2Paragraph 5.2
  169. 6Paragraph 6
  170. 7Paragraph 7
  171. 8Authorised representative
  172. Part MODULE D1:: QUALITY ASSURANCE OF THE PRODUCTION PROCESS
  173. 1Paragraph 1
  174. 2Technical documentation
  175. 3Paragraph 3
  176. 4Manufacturing
  177. 5Quality system Repealed
  178. 5.1Paragraph 5.1
  179. 5.2Paragraph 5.2
  180. 5.3Paragraph 5.3
  181. 5.4Paragraph 5.4
  182. 5.5Paragraph 5.5
  183. 6Surveillance under the responsibility of the approved body Repealed
  184. 6.1Paragraph 6.1
  185. 6.2Paragraph 6.2
  186. 6.3Paragraph 6.3
  187. 6.4Paragraph 6.4
  188. 7Conformity marking and declaration of conformity Repealed
  189. 7.1Paragraph 7.1
  190. 7.2Paragraph 7.2
  191. 8Paragraph 8
  192. 9Paragraph 9
  193. 10Authorised representative
  194. Part MODULE E:: CONFORMITY TO TYPE BASED ON INSTRUMENT QUALITY ASSURANCE
  195. 1Paragraph 1
  196. 2Manufacturing
  197. 3Quality system Repealed
  198. 3.1Paragraph 3.1
  199. 3.2Paragraph 3.2
  200. 3.3Paragraph 3.3
  201. 3.4Paragraph 3.4
  202. 3.5Paragraph 3.5
  203. 4Surveillance under the responsibility of the approved body Repealed
  204. 4.1Paragraph 4.1
  205. 4.2Paragraph 4.2
  206. 4.3Paragraph 4.3
  207. 4.4Paragraph 4.4
  208. 5Conformity marking and declaration of conformity Repealed
  209. 5.1Paragraph 5.1
  210. 5.2Paragraph 5.2
  211. 6Paragraph 6
  212. 7Paragraph 7
  213. 8Authorised representative
  214. Part MODULE E1:: QUALITY ASSURANCE OF FINAL INSTRUMENT INSPECTION AND TESTING
  215. 1Paragraph 1
  216. 2Technical documentation
  217. 3Paragraph 3
  218. 4Manufacturing
  219. 5Quality system Repealed
  220. 5.1Paragraph 5.1
  221. 5.2Paragraph 5.2
  222. 5.3Paragraph 5.3
  223. 5.4Paragraph 5.4
  224. 5.5Paragraph 5.5
  225. 6Surveillance under the responsibility of the approved body Repealed
  226. 6.1Paragraph 6.1
  227. 6.2Paragraph 6.2
  228. 6.3Paragraph 6.3
  229. 6.4Paragraph 6.4
  230. 7Conformity marking and declaration of conformity Repealed
  231. 7.1Paragraph 7.1
  232. 7.2Paragraph 7.2
  233. 8Paragraph 8
  234. 9Paragraph 9
  235. 10Authorised representative
  236. Part MODULE F:: CONFORMITY TO TYPE BASED ON PRODUCT VERIFICATION
  237. 1Paragraph 1
  238. 2Manufacturing
  239. 3Verification
  240. 4Paragraph 4
  241. 4.1Paragraph 4.1
  242. 4.2Paragraph 4.2
  243. 5Statistical verification of conformity Repealed
  244. 5.1Paragraph 5.1
  245. 5.2Paragraph 5.2
  246. 5.3Paragraph 5.3
  247. 5.4Paragraph 5.4
  248. 5.5Paragraph 5.5
  249. 6Conformity marking and declaration of conformity Repealed
  250. 6.1Paragraph 6.1
  251. 6.2Paragraph 6.2
  252. 7Paragraph 7
  253. 8Authorised representative
  254. Part MODULE F1:: CONFORMITY BASED ON PRODUCT VERIFICATION
  255. 1Paragraph 1
  256. 2Technical documentation
  257. 3Manufacturing
  258. 4Verification
  259. 5Verification of conformity by examination and testing of every instrument Repealed
  260. 5.1Paragraph 5.1
  261. 5.2Paragraph 5.2
  262. 6Statistical verification of conformity Repealed
  263. 6.1Paragraph 6.1
  264. 6.2Paragraph 6.2
  265. 6.3Paragraph 6.3
  266. 6.4Paragraph 6.4
  267. 6.5Paragraph 6.5
  268. 7Conformity marking and declaration of conformity Repealed
  269. 7.1Paragraph 7.1
  270. 7.2Paragraph 7.2
  271. 8Paragraph 8
  272. 9Paragraph 9
  273. Part MODULE G: CONFORMITY BASED ON UNIT VERIFICATION
  274. 1Paragraph 1
  275. 2Technical documentation
  276. 3Manufacturing
  277. 4Verification
  278. 5Conformity marking and declaration of conformity Repealed
  279. 5.1Paragraph 5.1
  280. 5.2Paragraph 5.2
  281. 6Authorised representative
  282. Part MODULE H:: CONFORMITY BASED ON FULL QUALITY ASSURANCE
  283. 1Paragraph 1
  284. 2Manufacturing
  285. 3Quality system Repealed
  286. 3.1Paragraph 3.1
  287. 3.2Paragraph 3.2
  288. 3.3Paragraph 3.3
  289. 3.4Paragraph 3.4
  290. 3.5Paragraph 3.5
  291. 4Surveillance under the responsibility of the approved body Repealed
  292. 4.1Paragraph 4.1
  293. 4.2Paragraph 4.2
  294. 4.3Paragraph 4.3
  295. 4.4Paragraph 4.4
  296. 5Conformity marking and declaration of conformity Repealed
  297. 5.1Paragraph 5.1
  298. 5.2Paragraph 5.2
  299. 6Paragraph 6
  300. 7Paragraph 7
  301. 8Authorised representative
  302. Part MODULE H1:: CONFORMITY BASED ON FULL QUALITY ASSURANCE PLUS DESIGN EXAMINATION
  303. 1Paragraph 1
  304. 2Manufacturing
  305. 3Quality system Repealed
  306. 3.1Paragraph 3.1
  307. 3.2Paragraph 3.2
  308. 3.3Paragraph 3.3
  309. 3.4Paragraph 3.4
  310. 3.5Paragraph 3.5
  311. 3.6Paragraph 3.6
  312. 4Design examination Repealed
  313. 4.1Paragraph 4.1
  314. 4.2Paragraph 4.2
  315. 4.3Paragraph 4.3
  316. 4.4Paragraph 4.4
  317. 4.5Paragraph 4.5
  318. 4.6Paragraph 4.6
  319. 5Surveillance under the responsibility of the approved body Repealed
  320. 5.1Paragraph 5.1
  321. 5.2Paragraph 5.2
  322. 5.3Paragraph 5.3
  323. 5.4Paragraph 5.4
  324. 6Conformity marking and declaration of conformity Repealed
  325. 6.1Paragraph 6.1
  326. 6.2Paragraph 6.2
  327. 7Paragraph 7
  328. 8Authorised representative
  329. 1Paragraph 1
  330. 2Paragraph 2
  331. 3Paragraph 3
  332. 4Paragraph 4
  333. 5Paragraph 5
  334. 6Paragraph 6
  335. 7.1Electromagnetic immunity Repealed
  336. 7.1.1Paragraph 7.1.1
  337. 7.1.2Paragraph 7.1.2
  338. 7.1.3Paragraph 7.1.3
  339. 7.2Durability
  340. 7.2.1Paragraph 7.2.1
  341. 7.2.2Paragraph 7.2.2
  342. 8.1Suitability
  343. 8.2Paragraph 8.2
  344. 9Units of Measurement
  345. 10Putting into Use
  346. ISPECIFIC REQUIREMENTS
  347. 1Paragraph 1
  348. 1.1Paragraph 1.1
  349. 1.2Paragraph 1.2
  350. 1.3The fuel/gas related conditions
  351. 1.4Paragraph 1.4
  352. 1.5Paragraph 1.5
  353. 2Maximum permissible error (MPEs) Repealed
  354. 2.1Gas meter indicating the volume at metering conditions or mass
  355. 2.2Paragraph 2.2
  356. 3Permissible effect of disturbances Repealed
  357. 3.1Electromagnetic immunity Repealed
  358. 3.1.1Paragraph 3.1.1
  359. 3.1.2Paragraph 3.1.2
  360. 3.1.3Paragraph 3.1.3
  361. 3.2Effect of upstream-downstream flow disturbances
  362. 4Durability
  363. 4.1Class 1.5 Gas Meters Repealed
  364. 4.1.1Paragraph 4.1.1
  365. 4.1.2Paragraph 4.1.2
  366. 4.2Class 1.0 Gas Meters Repealed
  367. 4.2.1Paragraph 4.2.1
  368. 4.2.2Paragraph 4.2.2
  369. 5Suitability Repealed
  370. 5.1Paragraph 5.1
  371. 5.2Paragraph 5.2
  372. 5.3Paragraph 5.3
  373. 5.4Paragraph 5.4
  374. 5.5Paragraph 5.5
  375. 5.6Paragraph 5.6
  376. 6Units
  377. Part II: PUTTING INTO USE AND CONFORMITY ASSESSMENT
  378. 7Paragraph 7
  379. 1Accuracy
  380. 2Rated operating conditions
  381. 3MPEs
  382. 4Paragraph 4
  383. 4.1Paragraph 4.1
  384. 4.2Effect of disturbances of long duration
  385. 4.3Permissible effect of transient electromagnetic phenomena Repealed
  386. 4.3.1Paragraph 4.3.1
  387. 4.3.2Paragraph 4.3.2
  388. 5Suitability Repealed
  389. 5.1Paragraph 5.1
  390. 5.2Paragraph 5.2
  391. 5.3Paragraph 5.3
  392. 5.4Running with no load
  393. 5.5Starting
  394. 6Units
  395. 7Putting into use
  396. 1Rated operating conditions
  397. 1.1The flowrate range
  398. 1.2Paragraph 1.2
  399. 1.3Paragraph 1.3
  400. 1.4Paragraph 1.4
  401. 2Accuracy classification and maximum permissible errors (MPEs) Repealed
  402. 2.1Paragraph 2.1
  403. 2.2Paragraph 2.2
  404. 2.3Paragraph 2.3
  405. 2.4.1Paragraph 2.4.1
  406. 2.4.2Paragraph 2.4.2
  407. 2.5Converted indication
  408. 2.6Conversion devices
  409. 2.7Paragraph 2.7
  410. 2.8Paragraph 2.8
  411. 3Maximum permissible effect of disturbances Repealed
  412. 3.1Paragraph 3.1
  413. 3.2Paragraph 3.2
  414. 4Durability
  415. 5Suitability Repealed
  416. 5.1Paragraph 5.1
  417. 5.2Paragraph 5.2
  418. 5.3Paragraph 5.3
  419. 5.4Instruments for direct sales Repealed
  420. 5.4.1Paragraph 5.4.1
  421. 5.4.2Paragraph 5.4.2
  422. 5.4.3Paragraph 5.4.3
  423. 5.4.4Paragraph 5.4.4
  424. 5.5Fuel Dispensers Repealed
  425. 5.5.1Paragraph 5.5.1
  426. 5.5.2Paragraph 5.5.2
  427. 5.5.3Paragraph 5.5.3
  428. 6Power supply failure
  429. 7Putting into use
  430. 8Units of measurement
  431. Chapter I: Requirements common to all types of automatic weighing instruments
  432. 1Rated Operating Conditions
  433. 1.1Paragraph 1.1
  434. 1.2Paragraph 1.2
  435. 1.3Paragraph 1.3
  436. 1.4Paragraph 1.4
  437. 2Paragraph 2
  438. 3Suitability Repealed
  439. 3.1Paragraph 3.1
  440. 3.2Paragraph 3.2
  441. 3.3Paragraph 3.3
  442. 3.4Paragraph 3.4
  443. 3.5Paragraph 3.5
  444. 3.6Paragraph 3.6
  445. 4Conformity assessment
  446. Chapter II: Automatic Catchweighers
  447. 1Paragraph 1
  448. 2MPE Repealed
  449. 2.1Paragraph 2.1
  450. 2.2Verification scale interval — single interval instruments
  451. 2.3Verification scale interval — multi-interval instruments
  452. 3Measurement Range
  453. 4Dynamic Setting Repealed
  454. 4.1Paragraph 4.1
  455. 4.2Paragraph 4.2
  456. 5Performance Under Influence Factors And Electromagnetic Disturbances Repealed
  457. 5.1Paragraph 5.1
  458. 5.1.1Paragraph 5.1.1
  459. 5.1.2Paragraph 5.1.2
  460. 5.2Paragraph 5.2
  461. Chapter III: Automatic Gravimetric Filling Instruments
  462. 1Accuracy classes Repealed
  463. 1.1Paragraph 1.1
  464. 1.2Paragraph 1.2
  465. 1.3Paragraph 1.3
  466. 1.4Paragraph 1.4
  467. 2MPE Repealed
  468. 2.1Static weighing error Repealed
  469. 2.1.1Paragraph 2.1.1
  470. 2.1.2Paragraph 2.1.2
  471. 2.2Deviation from average fill
  472. 2.3Error relative to pre-set value (setting error)
  473. 3Performance Under Influence Factor And Electromagnetic Disturbance Repealed
  474. 3.1Paragraph 3.1
  475. 3.2Paragraph 3.2
  476. 3.3Paragraph 3.3
  477. Chapter IV: Discontinuous Totalisers
  478. 1Paragraph 1
  479. 2Paragraph 2
  480. 3Totalisation scale interval
  481. 4Minimum Totalised Load (Σmin)
  482. 5Zero Setting
  483. 6Operator Interface
  484. 7Printout
  485. 8Performance under influence factors and electromagnetic disturbances Repealed
  486. 8.1Paragraph 8.1
  487. 8.2Paragraph 8.2
  488. Chapter V
  489. 1Accuracy classes
  490. 2Measurement Range Repealed
  491. 2.1Paragraph 2.1
  492. 2.2Paragraph 2.2
  493. 3MPE
  494. 4Speed of the belt
  495. 5General Totalisation Device
  496. 6Performance under influence factors and electromagnetic disturbances Repealed
  497. 6.1Paragraph 6.1
  498. 6.2Paragraph 6.2
  499. Chapter VI: Automatic Rail Weighbridges
  500. 1Accuracy classes
  501. 2MPE Repealed
  502. 2.1Paragraph 2.1
  503. 2.2Paragraph 2.2
  504. 2.3Paragraph 2.3
  505. 2.4Paragraph 2.4
  506. 3Scale interval (d)
  507. 4Measurement range Repealed
  508. 4.1Paragraph 4.1
  509. 4.2Paragraph 4.2
  510. 5Performance under influence factor and electromagnetic disturbance Repealed
  511. 5.1Paragraph 5.1
  512. 5.2Paragraph 5.2
  513. 1Paragraph 1
  514. 2Paragraph 2
  515. 3Paragraph 3
  516. 4Paragraph 4
  517. 5Paragraph 5
  518. 6.1Paragraph 6.1
  519. 6.2Paragraph 6.2
  520. 7Paragraph 7
  521. 8Paragraph 8
  522. 8.1Paragraph 8.1
  523. 8.2Paragraph 8.2
  524. 9Paragraph 9
  525. 10Paragraph 10
  526. 11Paragraph 11
  527. 12Paragraph 12
  528. 13Paragraph 13
  529. 14.1Paragraph 14.1
  530. 14.2Paragraph 14.2
  531. 14.3Paragraph 14.3
  532. 15.1Paragraph 15.1
  533. 15.2Paragraph 15.2
  534. 15.3Paragraph 15.3
  535. 16Paragraph 16
  536. 17Paragraph 17
  537. 18Paragraph 18
  538. 19Paragraph 19
  539. 20Paragraph 20
  540. 21Paragraph 21
  541. 22Paragraph 22
  542. 23Paragraph 23
  543. Part
  544. 1Material measures of length
  545. 1.1Reference Conditions
  546. 1.2Paragraph 1.2
  547. 2MPEs
  548. 3.1Materials
  549. 3.2Paragraph 3.2
  550. 4Markings
  551. IICapacity serving measures
  552. 1Reference Conditions Repealed
  553. 1.1Paragraph 1.1
  554. 1.2Paragraph 1.2
  555. 2MPEs
  556. 3Materials
  557. 4Shape Repealed
  558. 4.1Paragraph 4.1
  559. 4.2Paragraph 4.2
  560. 5Marking Repealed
  561. 5.1Paragraph 5.1
  562. 5.2Paragraph 5.2
  563. 5.3Paragraph 5.3
  564. 1Instrument Classes
  565. 2Rated operating conditions
  566. 2.1Paragraph 2.1
  567. 2.2Paragraph 2.2
  568. 2.3Paragraph 2.3
  569. 3Maximum permissible errors (MPEs)
  570. 3.1Paragraph 3.1
  571. 3.2Paragraph 3.2
  572. 4Permissible effect of disturbances
  573. 5Paragraph 5
  574. 6Other requirements
  575. 8Paragraph 8
  576. 9Paragraph 9
  577. 10Paragraph 10
  578. 11Paragraph 11
  579. 12Paragraph 12
  580. 13Paragraph 13
  581. 14Paragraph 14
  582. 1Declaration of Conformity (No. XXXX)
  583. 2Paragraph 2
  584. 3Paragraph 3
  585. 4Paragraph 4
  586. 5Paragraph 5
  587. 6Paragraph 6
  588. 7Paragraph 7
  589. 8Paragraph 8
  590. Schedule 2: MEASURING INSTRUMENT WHICH MAY CONTINUE TO BE PUT INTO USE
  591. 1Cold water meters
  592. 3Gas meters
  593. 5Active electrical energy meters
  594. 6Paragraph 6
  595. 8Automatic Weighing instruments
  596. 9Measuring systems for the measurement of liquid fuel and lubricants
  597. 11Measuring systems used for deliveries from road tankers
  598. 13Taximeters
  599. 14Material measures of length
  600. 15Paragraph 15
  601. 16Exhaust gas analyser
  602. Schedule 3: REVOCATIONS AND TRANSITIONAL AND CONSEQUENTIAL PROVISIONS
  603. 1Instruments revoked
  604. 2Transitional provisions
  605. 3Amendments to the Consumer Rights Act 2015
  606. Schedule 4: OPERATIONAL OBLIGATIONS OF NOTIFIED APPROVED BODIES
  607. 1Paragraph 1
  608. 2Paragraph 2
  609. Schedule 5: REQUIREMENTS RELATED TO NOTIFIED APPROVED BODIES
  610. 2Paragraph 2
  611. 4Paragraph 4
  612. 7Paragraph 7
  613. 8Paragraph 8
  614. Schedule 6: IN SERVICE REQUIREMENTS FOR CERTAIN REGULATED MEASURING INSTRUMENTS IN GREAT BRITAIN
  615. Part 1: INTRODUCTORY
  616. 1Paragraph 1
  617. Part 2: COLD WATER METERS
  618. 2Requirements for use for trade
  619. 3Maximum permissible error
  620. 4Paragraph 4
  621. Part 3: LIQUID FUEL AND LUBRICANTS
  622. 5Requirements for use for trade
  623. 6Paragraph 6
  624. 7Maximum permissible error
  625. 8Manner of use
  626. Part 4: LIQUID FUEL DELIVERED FROM ROAD TANKERS
  627. 9Requirements for use for trade
  628. 10Paragraph 10
  629. 11Maximum permissible error
  630. 12Manner of use
  631. 13Minimum measured quantity
  632. Part 5: AUTOMATIC CATCHWEIGHERS
  633. 15Requirements for use for trade of automatic catchweighers
  634. 16Maximum permissible error
  635. 17Manner of use
  636. 18Paragraph 18
  637. 19Paragraph 19
  638. 20Paragraph 20
  639. 21Manner of erection and installation
  640. Part 6: AUTOMATIC GRAVIMETRIC FILLING INSTRUMENTS
  641. 22Paragraph 22
  642. 23Maximum permissible error
  643. 24Manner of use
  644. 25Automatic gravimetric filling instruments to be set to zero
  645. 26Manner of erection and installation
  646. Part 7: AUTOMATIC DISCONTINOUS TOTALISERS
  647. 27Requirements for use for trade
  648. 28Manner of use
  649. 29Manner of erection and installation
  650. Part 8: AUTOMATIC RAIL WEIGHBRIDGES
  651. 30Requirements for use for trade
  652. 31Manner of erection and installation
  653. 32Maximum permissible error and accuracy class
  654. 33Manner of use
  655. Part 9: BELTWEIGHERS
  656. 34Requirements for use for trade
  657. 35Manner of use
  658. 36Position of the operator
  659. 37Manner of erection and installation
  660. Part 10: MATERIAL MEASURES OF LENGTH
  661. 38Requirements for use for trade
  662. 39Manner of use
  663. Part 11: CAPACITY SERVING MEASURES
  664. 40Requirements for use for trade
  665. 41Manner of use
  666. Schedule 7: MONETARY PENALTIES
  667. 1Introduction
  668. 2Procedure
  669. 3Appeals
  670. 4Interest and recovery
  671. Explanatory note